by R.G. Robinett
It seems that Al Nyhus has sold his bullet making equipment to Craig Nagel, thus siphoning yet more fuel from my ever diminishing, “outrageous income”! 🙂 Therefore, in the interest of promoting a continuation of [the tradition of] semi-respectability, I will be posting a series of pics & brief explanations to this thread – ‘the way I do things’ – bear in mind, there ARE other ways!
These pics are of my first attempt, which, to this day, works quite well! The idea of using the Lee Classic cast presses came from [the late] Ferris Pendell – he was not your average idiot!
I believe that George Ulrich still offers these parts, ready made, and, probably, compared to my crude crude parts, much improved/refined.
I’ll attempt to answer any/all questions. RG
Craig, per our conversation, you probably won’t want to pursue this approach – you can simply craft a ram-adapter which mimics the ram on your Blackmon press – that is, simply mill a slot and a female thread for the Blackmon die/pin-stop. The stop-pin holder/locator may prove slightly more challenging – but, you’re more that up to that!
Still, for those interested, here are some pics of my die-holders, which invert the Blackmon dies, to match the way Pindell;Niemi;Ulrich;other dies work – that is, “right-side-up” , with the die body held (stationary) in the 7/8Ths X 14 thread, and the punches held in the ram!
Above, the whole story – the Blackmon dies screw into the holders: note the die on the left, in relation to the point-up die threaded into the die-body just above the bullet. The Blackmon knock-out pin (ejector-pin) is seen inserted into the point-up die . . . On the right, is the die-holder for the core-seat and core form (squirt) dies, which simply requires a ROD, and an internal STOP shoulder, machined into the die-cap.
Above: a close-up of the Blackmon core-form die and the BIB die-holder; the core-seat die interchanges with the core-squirt die . . .
Above: a Blackmon point-up die, punch, and bullet, next to the point-up die-holder, with, for clarity, yet another Blackmon point-up die threaded into the base. Accommodating ejection is a little more tricky, but even BIG MIKE was able to make it work quite well!
Above: another over-all view of the bodies/dies.
As you can guess, I made these using materials which I had laying around in the shop, – they are similar to the way Pendell made his dies – the 7/8 Ths X 14 threaded die-holders could be used to interchange between dies. I’ll try to make time to provide a brief explanation of each pic. RG
P.S. For dies which are seldom “moved”, purchasing extra thread adapters is a simple and cost effective solution: as in the second pic from bottom, the adapter is locked in place, thus, when the die is screwed back on to the same press, the ram/die/punch relationship is retained. This is especially nice for FL resizing and, if bullet making, for pointing with a variety of dies and one press, while maintaining constant length. For operations where the die is constantly changing, say, coring differing weights/lengths/calibers, it’s obviously not as necessary. Again, compa[wink]red to the competition,Lee has the fit and alignment well under control.
Posted Oct 25, 2014
“It seems that Al Nyhus has sold his bullet making equipment to Craig Nagel, thus siphoning yet more fuel from my ever diminishing, “outrageous income”! [wink] “
Good one, Randy!
Yep…..Craig picked up all the bullet making gear and doodads that I’d accumulated over the past years. I spilled all my bullet making knowledge (that took 3 minutes) and gave him strict instructions to call you when (not if…when) he sticks a bullet in the point die. I told him 2:00 A.M. was the best time to call ‘ya. [wink]
Just kidding, of course. The years making bullets was a lot of fun and filled with learning. I greatly appreciate all the help you gave me, Randy. When I was pondering some subtle nuance of lube, tumbling time…or whatever had my brain in a storm at that juncture…a call to you made everything clear again. Shelter from the storm, so to speak.
This ones for you, my friend…………….
Posted Nov 01, 2014
I like the flick, Al! [biggrin] I especially relate to the Grim Reaper and the Angel – neither being able to decide where to put me! [tongue]
Craig is working on a conversion, which looks quite GOOD – perhaps, when he’s finished, he’ll post some pics! He’s too clever – almost semi respectable at times . . . [cool] RG